Precision Bench Centers (Standard/ Vertical/ Special Type)
1) PRECISION BENCH CENTRES (STANDARD TYPE)
- Used for eccentricity and deflection Measurement of shafts, etc.
Product Description:
- Used for eccentricity and deflection Measurement of shafts, etc.
- Parallellism between table upper surface and center is assured.
- Center entry/exit is performed by one touch lever.
・According to your requirement, we can manufacture variations with carbide center or brolly center.
・Dial gauge and test bar are not included.
Code No. | Model |
Full Lenght (Lmm) |
Center Distance (mm) |
Center Height (mm) |
Use Center |
Height Parallellism (μm) |
Weight (kg) |
SA101 | No.-1 | 650 | 400 | 150 | MT#1 | 6 | 31 |
SA102 | No.-2 | 1220 | 800 | 240 | MT#2 | 8 | 87 |
SA103 | No.-3 | 1645 | 1200 | 300 | MT#3 | 10 | 135 |
2) PRECISION BENCH CENTRES (P-TYPE)
- Small sized type of standard model tester.
- Small sized type of standard model tester.
- Used for eccentricity and deflection Measurement of shafts, etc.
- Parallellism between table upper surface and center is assured.
- Center entry/exit is performed by one touch lever.
・According to your requirement, we can manufacture variations with carbide center or brolly center.
・Dial gauge and test bar are not included.
Code No. | Model |
Full Lenght (Lmm) |
Center Distance (mm) |
Center Height (mm) |
Use Center |
Height Parallellism (μm) |
Weight (kg) |
SAP101 | P-1 | 410 | 150 | 110 | MT#1 | 5 | 14.0 |
SAP102 | P-2 | 470 | 200 | 15.5 | |||
SAP103 | P-3 | 560 | 300 | 17.0 |
3) PRECISION BENCH CENTRES WITH V-BLOCK
- Tester with V Block (V Width 16mm) attached to stock.
- Tester with V Block (V Width 16mm) attached to stock.
- Can be used for measurement of shafts, etc with center hole, or without hole
- On the dial gauge stand, a lever type dial gauge is installed.
- Center entry/exit can be performed by a one touch lever.
¡ù・Dial gauge and test bar are not included.
Code No. | Model |
Full Lenght (Lmm) |
Center Distance (mm) |
Effective Center Height (mm) |
Use Center |
Height Parallellism (μm) |
Weight (kg) |
SCV101 | CV-1 | 530 | 300 | 75 | MT#1 | 5 | 14 |
4) VERTICAL TYPE PRECISION BENCH CENTRES (VP-TYPE)
- Surface Plate flatness is JIS Grade 1.
- Surface Plate flatness is JIS Grade 1.
- Surface Plate is bag type, therefore long term accuracy can be manitained.
- The Stock moves up/down by gear.
- Due to balance weight within the column, it moves with minimum force.
¡ù・According to your requirement, we can manufacture head spin type.
・Test bar is not included.
Code No. | Model |
Measurement (L×Wmm) |
Center Distance (mm) |
Center Height (mm) |
Use Center | Center Axis Perpendicularity (μm) |
Weight (kg) |
SVP101 | VP-1 | 600×500 | 400 | 150 | Carbide MT#2 | 5 | 230 |
SVP102 | VP-2 | 900×600 | 700 | 200 | Carbide MT#3 | 8 | 440 |
SVP103 | VP-3 | 1000×750 | 1000 | 240 | 12 | 550 |